tunisieRepublique Tunisienne
Ministère de l'Industrie, des Mines et de l’Energie
  • arabe
  • francais
  • anglais
Flux RSS ONM
  1.  Rapport d'activités 2023
    Rapport d'activités 2023
  2. Programmes Techniques 2024
    Programmes Techniques 2024
Outil de recherche métadonnées
  1. Acquisition des tickets restaurant pour le personnel de l’ONM
    ACQUISITION DES TICKETS RESTAURANT POUR LE PERSONNEL DE L’ONM
  2. Choix d’une compagnie d’assurance au profit de l’ONM
    CHOIX D’UNE COMPAGNIE D’ASSURANCE
  3. ACQUISITION ET MISE EN ŒUVRE D’UN PROGICIEL DE GESTION INTEGRE
    ACQUISITION ET MISE EN ŒUVRE D’UN PROGICIEL DE GESTION INTEGRE
Investir en Tunisie


Liens Utiles
Ressources en lignes
Sondages en ligne
Que pensez-vous de notre site ?
Excellent
Très bien
Bien
Moyen


Voir résultats des sondages
Search Biblio.
:: Documentation and Editions >> Research library
 

[ Search by author ] [ Search keyword ] [ Search by index ] [ Search by category ]



title of the reference :  Preliminary results on the properties of pillared clays by mixed Al-Cu solutions.
Publication Date: 1997
Author : Frini N., Crespin M., Trabelsi Hamda, Messad D., Van Damme, Bergaya F.
Catalogue type : Livre
Catalogue reference : (NLD) Appl. Clay Sci. Preliminary results on the properties of pillared clays by mixed Al-Cu solutions. Three crude bentonites samples from USA (W), Tunisia (H)and Algeria (MR)have been used in order to prepare Cu-exchanged and new mixed Al-Cu pillared clays by three methods 1/ a classical 'dilute suspension and solution' method by adding the nitrate pillaring solution to a 2percent clay suspension, 2/ a 'powder in solution' method where the clay powder is dispersed in the pillaring solution and 3/ a 'concentrated slurry' method in which a dialysis bag containing clay-water slurry (33percent w/w)is placed in the pillaring solution. These three methods are called D, P and CS respectively. Pillaring reactions was performed at 40°C with a OH/ (Al+Cu)molar ratio (R)equal to 2 and at Cu/(Al+Cu)ratio of 0, 5 and 10 percent, respectively. Chemical analysis, X-ray diffraction, N::(2)BET surface area and cation exchange capacity measurements were carried out to characterize the pillared materials. The results show that after calcination at 300°C, the three pillaring methods lead to a d::(001)peak at about 1.8 nm which subsists after one year ageing, and which remains at 1.6 nm even at 800°C for some samples. Catalytic tests in oxidation reaction of phenol by H::(2)O::(2)in diluted aqueous solution performed at room temperature show an interesting activity of the Cu-clays. Etude expérimentale ; Solution ; Aluminium ; Cuivre ; Bentonite ; Echange ion ; Nitrate ; Suspension ; Dispersion ; Analyse éléments majeurs ; Diffraction RX ; Capacité échange cation ; Catalyse ; Oxydation ; Phénol ; Peroxyde hydrogène ; Solution aqueuse ; Propriété physicochimique ; Carbone organique ; Argile à piliers ; Dialyse ; Calcination ; Roche clastique ; Roche sédimentaire ; Tunisie ; Algérie ; Etats Unis Van Damme Bergaya F. Crespin M. Trabelsi Hamda Messad D. Frini N. Minéralogie
Indexation decimale : Minéralogie
Keywords : Etude expérimentale ; Solution ; Aluminium ; Cuivre ; Bentonite ; Echange ion ; Nitrate ; Suspension ; Dispersion ; Analyse éléments majeurs ; Diffraction RX ; Capacité échange cation ; Catalyse ; Oxydation ; Phénol ; Peroxyde hydrogène ; Solution aqueuse ; Propriété physicochimique ; Carbone organique ; Argile à piliers ; Dialyse ; Calcination ; Roche clastique ; Roche sédimentaire ; Tunisie ; Algérie ; Etats Unis
Summary : Three crude bentonites samples from USA (W), Tunisia (H)and Algeria (MR)have been used in order to prepare Cu-exchanged and new mixed Al-Cu pillared clays by three methods 1/ a classical 'dilute suspension and solution' method by adding the nitrate pillaring solution to a 2percent clay suspension, 2/ a 'powder in solution' method where the clay powder is dispersed in the pillaring solution and 3/ a 'concentrated slurry' method in which a dialysis bag containing clay-water slurry (33percent w/w)is placed in the pillaring solution. These three methods are called D, P and CS respectively. Pillaring reactions was performed at 40°C with a OH/ (Al+Cu)molar ratio (R)equal to 2 and at Cu/(Al+Cu)ratio of 0, 5 and 10 percent, respectively. Chemical analysis, X-ray diffraction, N::(2)BET surface area and cation exchange capacity measurements were carried out to characterize the pillared materials. The results show that after calcination at 300°C, the three pillaring methods lead to a d::(001)peak at about 1.8 nm which subsists after one year ageing, and which remains at 1.6 nm even at 800°C for some samples. Catalytic tests in oxidation reaction of phenol by H::(2)O::(2)in diluted aqueous solution performed at room temperature show an interesting activity of the Cu-clays.
Exemplaries : -


 

Siège social de l'ONM 24,rue de L'Energie, 2035 La Charguia - Tunis | BP: 215 - 1080 Tunis Cedex - Tunisie | Tél:(216) 71 808 013 / 71 808 266 - Fax (216) 71 808 098
Tous droits réservés ©2024 Office National des Mines
Dernière mise à jour :28-04-2024